General Guidance

TUB & SHOWER CLEANER

Hold the sprayer 6" - 12" from the surface and spray the area. Note: For vertical surfaces, start from the bottom and work upward. Wipe the surface with a soft, damp sponge or cloth. Never use an abrasive material such as a brush or scouring pad.

DRAIN TREATMENT

Blocked drains: Remove as much standing water as possible. Pour entire contents of the package in a clogged drain. Allow to work overnight, if possible. Flush with hot water.

Slow drains: Add 4 ounces of product for each inch of diameter of drain pipe. Add at lowest water-use period for best results. Continue daily until system flows freely, then add every other week as a preventative maintenance measure.

FLUSHING YOUR WHIRLPOOL

Flush your whirlpool system twice a month or more, depending upon usage.

Adjust the jets fully clockwise so there is no air induction.

Fill the bath with warm water to a level 2" above the highest jets, or leave water in the bath after using.

Add 3.5 ounces of Kohler® Whirlpool Disinfectant per 4.5 gallons of water.

Run the whirlpool for ten minutes. Then shut off the whirlpool and drain the water.

Rinse the bath's surfaces with fresh water.

Wipe dry with a clean sponge or cloth, or allow to air-dry.

How to Clean Your KOHLER Bath

Tub & Shower Cleaner

Drain Treatment

Whirlpool Disinfectant